Clean room structural reinforcement by steel plate

Clean room structural reinforcement by steel plate method. Structural adhesive:HM-120 steel plate adhesive,HM-120M perfusion steel plate adhesive, 250*3mm steel plate, U-shaped hoop plate 200*3mm, M8 chemical anchor

Strengthening by steel plate


Strengthening by steel plate


Project overview

The project has a converted building area of 3820.27m2, one floor above ground, two floors above ground (partial), roof (partial), total building height of 16.7m.The main reinforcement area of this project is one floor roof kb-hb~4b-1/6b, and the stairwell on the roof is Eb-2/Db~7b-2/8b.


Materials

Structural adhesive:HM-120 steel plate adhesive,HM-120M perfusion steel plate adhesive, 250*3mm steel plate, U-shaped hoop plate 200*3mm, M8 chemical anchor


Obstacles are removed → Take-off line, along the line → Anchor holes are punched → Clean the structural surface of the steel-bonded steel plate → Assembled steel plate welding, Weld grinding, Derusting of steel plate → Bonded steel → Brush anti-rust paint → acceptance

المنتجات المستخدمة في هذا المشروعالأشخاص الذين تصفحوا هذا المشروع يهتمون أيضًا بهذه المنتجات

Back
Top
Close